|
|
71009
|
(suffix = length in mm/100), equivalent to P/N 40 467-xx
unmachined section: P/N 71911 / equivalent to 40 468
Aluminium 7075T6511, finish natural, surface treatment available upon request
890 grs/m
Heavy Duty Seat Track
conforms to AS33601
Load capacity: **
vertical 26,67 kN / 6000 lbs with Single Stud fitting, 44,45 kN / 10000 lbs with double stud fitting
|
|
|
71202
|
(suffix = length in mm/100), equivalent to P/N 40 456-xx unmachined section: P/N 71921 / equivalent to 40 423
Aluminium 7075T6511 or T73511, finish natural, surface treatment available upon request
590 grs/m
Medium Duty
Seat Track
Load capacity: **
vertical 20,00 kN / 4500 lbs** with single stud fitting
|
|
|
120135
|
Aluminium 7075, anodized
19 grs
Anchor Point light
vertical 14,00 kN / 3150 lbs
horizontal 7,00 kN / 1575 lbs
(with fitting according to AS33601, depending on type of screw used)
|
|
|
40 000
|
Aluminium 7075, anodized,
21 grs
Anchor Plate
vertical 17,78 kN / 4000 lbs
horizontal 8,89 kN / 2000 lbs
(with fitting according to AS33601)
|
|
|
160037
|
Body and Plunger Steel
216 grs
Quick Change Fitting,
Quadruple Stud
for high load 16 g applications,
with additional shear plunger
Ultimate load: > 50,00 kN / 11250 lbs*
(tension under 45°)
|
|
|
44 360
|
Body steel, heat-treated and PTFE coated, Plunger steel, cad-plated
114 grs
Rear Leg Fitting
Ultimate load:
P 43,12 kN / 9700 lbs
in direction shown (56° from track level)*
|
|
|
40 463
|
Body steel forging, plunger alloy steel, heat-treated and cad-plated
87 grs
Track Fitting
plunger spring locked
Ultimate load:*
Pt 28.89 kN / 6500 lbs
Ps 22.22 kN / 5000 lbs
L: .71
T: .34
|
|
|
40 191
|
Body steel forging, heat-treated and zinc-plated, retainer alloy steel, zinc-plated
57 grs
Stud Fitting Assy,
Ultimate load:*
tension and shear
28,9 kN / 6500 lbs
A: 23,4 B: 15,7 G: 6,4
|
|
|
43021
|
Stud heat treated alloy steel, cad-plated, Nut PTFE coated
41 grs
Front Leg Fitting, Single Stud,with anti-rattle device A: .41 L: 1.12
|
|
|
110089
|
Stud CRES, passivated, Body and Lever Aluminium, anodized
51 grs
Quick Change Fitting
Single Stud
to be incorporated into the front seat leg
Geometry can be adapted to customers requirements
|
|
|
41 713-10
|
Stainless Steel
24 grs
Min. Ultimate load: 11,11 kN / 2500 lbs A: 1.00 B: .315 - .322
|
|
|
110120
|
Fitting and Retainer CRES - cad-plate + primer
47 grs
Double Stud Fitting thread. 5/16-24 UNJF-3B (blind hole). self-locking (re-usable). Also available as no-loose-parts assembly
Min. loads:* Fx 27,00 kN. Fy 16,00 kN. Fz 35,00 kN. (applied individually) A: 9,0. (thread-lock)
|
|
|
40 081
|
Retainer: Aluminium 7075 Nut and stud: Heat-treated alloy steel, cadmium-plated.
44 grs
Fitting Assy, threaded stud Rotating nut raises and lowers retainer Ultimate load: 13.33 kN / 3000 lbs* A = 1.42
|
|
|
40 351
|
Stud and Retainer steel, heat-treated Finish: zinc- or cad-plated
69 grs
A: .76. Stud Assy, anti-rotating Load rate: 17.78 kN / 4000 lbs* in both shear and tension
|
|
|
71139
|
Acero galvanizado, amarillo pasivado.
0,22 kg
Capacidad de carga 1000daN
|
|
|
40041-10
|
Steel, cadmium-plated
77 grs
Single Stud Breakaway Fitting, adjustable
Drawing shows P/N 40 041-10
-51 to -58 with two pivot levers,
-59 and -63 with round ring.
-11 to -19 has been super-seeded by -51 to -59
kn: 7,11. load capacity lbs*: 1600 min
|
|
|
75006
|
Steel, zinc-plated.
28 grs.
Hook . Ultimate load:*** 8.0 kN / 1800 lbs
|
|
|
75532
|
Aluminium, anodized
8 grs
Hook D = 8 mm Ultimate load: 6,7 kN / 1500 lbs
|
